🔢 Step 2: Using Github to Download Files

If Using a Classroom Router

If you are completing this project in a classroom and using a router, skip this step and move onto the next section, Step 3: Servo Install.

Turn on car, make sure batteries are fully charged
Make sure your computer is on the same WiFi as your robot car
SSH into your car
git clone https://github.com/betaboxlearning/robotcar.git
ls
Verify that robotcar has downloaded successfully
cd robotcar
sudo ./install_dependencies
Wait for download to complete (it will then ask if you want to reboot immediately)
yes
You will lose network connection, that’s ok!
SSH back into your car