Getting the Live Feed

It’s now time to drive your car using remote control!

1. Make sure the batteries are fully charged and then turn on your car.
2. SSH into car
3. Type the password you created during the imaging of the Raspberry Pi step (possibly raspberry). The password will not show up when you type!
4. Type sh run.sh  and press enter.
   
5. Open an internet browser and type the hostname you created:5000 in the address bar.
   Example: If you set your hostname as robotcar1, you will need to type robotcar1:5000.
   
6. Follow the instructions on the page to drive your car!