Lesson Activity – Wiring and Programming Smart Lighting

Lesson Activity - Wiring and Programming Smart Lighting

In this activity, you follow the instructional video to connect, install, and test an IoT Smart Light based on the ESP32 and Grove components.

Your goals:

• Using your Betabox Electrician Foundations and Futures Hands-On Project box and following best practices you learned in this course, create the smart light and LED circuits from the lesson activity video.
• Test the Smart Lighting system to ensure:
• Measurement of ambient light (lux)
• Ability to set RGB values of the LED
• Ability to set and activate low-light threshold  

To connect to the ESP32 IoT device, the default SSID is ESP32_Smart_Hub and the password is 12345678

Check your kit or device, it may have a different SSID or Password that is specific to your kit!